Skip to main content
Exhibits > Pumping stations > FPS-K single and dual unit
Pumping stations
FPS-K single and dual unit
Pumping of waste water from single-family homes or apartment buildings. For installation outside bulidings.
Sanifos includes more than 90 combination options.

The FPS-K single and dual unit is a powerful pumping station with one or two ZFS 71 macerator pumps for underfloor installation (below ground) outside of buildings. These pumping stations dispose of grey water and blackwater from single-family homes, apartment blocks, public and commercial buildings and can be used as drainage pumping stations or for pressure drainage. They are buoyancy-proof up to a maximum groundwater level of 120 cm from the bottom edge of the shaft. The PE-LLD prefabricated shaft has a volume of 1,600, 2,100 or 3,100 litres and can be height-adjusted using an optional, adjustable top section. For these models, shaft covers are available in BEGU classes A, B or D. The pressure pipes and ZFS 71 macerator pump(s) with coupling system and removal chain are pre-assembled in the shaft. There are 5 macerator pumps of different performance classes available. The maximum discharge head is 39 m, the pumping capacity 17 m³/h. The pumping stations have a DN 100 side inlet and 2 further DN 100 connections for ventilation and cable entry. The waste water is discharged through a DN 50 pressure pipe outlet. The scope of delivery includes a non-return valve, pneumatic control ZPS1 or ZPS2, connection accessories and a connection cable. A float control is available as n aoption. Available in over 90 different configurations – optimally matched to your individual project.

Pumping stations
FPS-K single and dual unit
Pumping of waste water from single-family homes or apartment buildings. For installation outside bulidings.
Sanifos includes more than 90 combination options.

The FPS-K single and dual unit is a powerful pumping station with one or two ZFS 71 macerator pumps for underfloor installation (below ground) outside of buildings. These pumping stations dispose of grey water and blackwater from single-family homes, apartment blocks, public and commercial buildings and can be used as drainage pumping stations or for pressure drainage. They are buoyancy-proof up to a maximum groundwater level of 120 cm from the bottom edge of the shaft. The PE-LLD prefabricated shaft has a volume of 1,600, 2,100 or 3,100 litres and can be height-adjusted using an optional, adjustable top section. For these models, shaft covers are available in BEGU classes A, B or D. The pressure pipes and ZFS 71 macerator pump(s) with coupling system and removal chain are pre-assembled in the shaft. There are 5 macerator pumps of different performance classes available. The maximum discharge head is 39 m, the pumping capacity 17 m³/h. The pumping stations have a DN 100 side inlet and 2 further DN 100 connections for ventilation and cable entry. The waste water is discharged through a DN 50 pressure pipe outlet. The scope of delivery includes a non-return valve, pneumatic control ZPS1 or ZPS2, connection accessories and a connection cable. A float control is available as n aoption. Available in over 90 different configurations – optimally matched to your individual project.

Special features
  • Suitable for all types of waste water from residential buildings, shops, single-family homes or apartment blocks and public buildings
  • Complete solution comprising a fully compatible tank, Sanipump ZFS 71 high-performance submersible pumps, controllers and accessories
  • Buoyancy-proof up to a maximum groundwater level of 1.2 m from the bottom edge of the shaft
  • Inlet depths of up to 2.94 m thanks to the adjustable attachment
  • Available in 1600 l, 2100 l and 3100 l, and with one or two pumps in different performance classes
  • Set of class A, B or D protective covers – load capacity up to 40 tonnes (class D)
  • Frost-proof installation
Technical data
FPS-K single and dual unit
Discharge head max. (m) 39
Flow rate max. (m³/h) 17
Waste water type Grey water
Blackwater
Motor seal material Carbon/ceramic
Drive shaft Stainless steel
Motor housing EN-GJL-200
Pump housing EN-GJL-200
Seal SIC/SIC/NBR
Pipework Stainless steel
Tank PE-LLD
Motor insulation class F
Electrical class I
Frequency (Hz) 50
Number of pumps 1 or 2
Immersion depth (m) 5
Power input P1 (W) 3900
Power output P2 (W) 3200
Speed (1/min) 2800
Submerged operation S1
Operating mode S3 40%
Voltage (V) 400
Connection cable length (m) 10
Mains cable S1BN8-F, 1.5 mm²
Max. recommended height (m) 35
Pressure line diameter DN 50
Outer ventilation diameter (mm) 100
Max. temperature of pumped liquid (short-term, max. 5 min.) 70 °C
Wheel type Pro X K3 macerator