Skip to main content
Exhibits > Pumping stations > Sanifos 1200 ZFS
Pumping stations
Sanifos 1200 ZFS
Pumping station with a pump for underground installation for the disposal of grey water and blackwater from single-family homes

The Sanifos 1200 ZFS complete pumping station is suitable for the disposal of grey water and blackwater from single-family homes. It can also be used as a drainage pumping station as well as for pressure drainage. It is designed for underground installation outside of buildings and is suitable for areas prone to frost. There is a choice of class A, B and D shaft covers, which means that the station can also be installed in areas used by vehicles. The complete pumping station is delivered as a full set including all components. The system is controlled using the intuitive ZPS 1 control terminal.

Pumping stations
Sanifos 1200 ZFS
Pumping station with a pump for underground installation for the disposal of grey water and blackwater from single-family homes

The Sanifos 1200 ZFS complete pumping station is suitable for the disposal of grey water and blackwater from single-family homes. It can also be used as a drainage pumping station as well as for pressure drainage. It is designed for underground installation outside of buildings and is suitable for areas prone to frost. There is a choice of class A, B and D shaft covers, which means that the station can also be installed in areas used by vehicles. The complete pumping station is delivered as a full set including all components. The system is controlled using the intuitive ZPS 1 control terminal.

Special features
  • Comprehensive solution featuring a coordinated shaft, submersible pump, shaft cover and accessories
  • Set of class A, B or D protective covers – load capacity up to 40 tonnes (class D)
  • Shaft made of corrosion-resistant PE-LLD for a lifetime of use
  • Quick-coupling base for easy insertion of the pump and optimal sealing
  • Buoyancy-proof up to a maximum groundwater level of 0.5 m from the bottom edge of the shaft
  • ZFS 71 high-performance submersible pump for continuous operation (S1 operating mode ) with the pump fully submerged
  • Sturdy, reliable and adjustable Pro X K3 high-performance macerator – can cut through textile solids effortlessly
  • Reliable and highly dependable thanks to high-quality grey cast iron components and double mechanical seal with oil chamber
Technical data
Sanifos 1200 ZFS
Discharge head max. (m) 39
Flow rate max. (m³/h) 17
Waste water type Grey water
Blackwater
Motor seal material Carbon/ceramic
Drive shaft Stainless steel
Motor housing EN-GJL-200
Pump housing EN-GJL-200
Seal SIC/SIC/NBR
Pipework Stainless steel
Tank PE-LLD
Motor insulation class F
Electrical class I
Frequency (Hz) 50
Number of pumps 1
Immersion depth (m) 5
Power input P1 (W) 3900
Power output P2 (W) 3200
Speed (1/min) 2800
Submerged operation S1
Operating mode S3 40%
Voltage (V) 400
Connection cable length (m) 10
Mains cable S1BN8-F, 1.5 mm²
Max. recommended height (m) 22
Pressure line diameter DN 50
Outer ventilation diameter (mm) 100
Max. temperature of pumped liquid (short-term, max. 5 min.) 70 °C
Wheel type Pro X K3 macerator