Submersible pumps
Sanisub Steel emergency kit
Emergency kit for mobile use in flooded basements, tanks, pits, as well as in the event of groundwater or high water
The Sanisub Steel is a basement drainage pump for pumping clear, slightly contaminated water from pools, tanks and flooded basements. The Sanisub Steel is a stainless steel pump with optimised cooling. The pump can lift water up to a discharge head of 7.5 m, with a particle size of 10 mm and a maximum temperature of 70 °C for short periods. The emergency kit includes a basket with fasteners and 15 m of pressure line hose with quick-release couplings.
Submersible pumps
Sanisub Steel emergency kit
Emergency kit for mobile use in flooded basements, tanks, pits, as well as in the event of groundwater or high water
The Sanisub Steel is a basement drainage pump for pumping clear, slightly contaminated water from pools, tanks and flooded basements. The Sanisub Steel is a stainless steel pump with optimised cooling. The pump can lift water up to a discharge head of 7.5 m, with a particle size of 10 mm and a maximum temperature of 70 °C for short periods. The emergency kit includes a basket with fasteners and 15 m of pressure line hose with quick-release couplings.
Special features
- Mobile and instantly usable emergency kit – all components are always quickly to hand
- Safe and autonomous application thanks to float switches, motor protection and optimised cooling
- Anti-kink protection and durable hose for high operational reliability
- Cable attachment for modular level control adjustment
- Also suitable for slightly contaminated water with suspended matter (max. 10 mm)
- Sturdy, corrosion-resistant and durable thanks to the use of high-quality stainless steel and polyamide
Technical data
Sanisub Steel emergency kit | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Discharge head max. (m) | 7.5 | |||||||||||||
Flow rate max. (m³/h) | 9 | |||||||||||||
Waste water type | Contaminated water Clear water Grey water |
|||||||||||||
Drive shaft | Stainless steel | |||||||||||||
Motor housing | Stainless steel | |||||||||||||
Pump housing | EN-GJL-200 | |||||||||||||
Seal | Carbon/ceramic | |||||||||||||
Pump wheel | PA 6 GF | |||||||||||||
Motor insulation class | F | |||||||||||||
Electrical class | I | |||||||||||||
Frequency (Hz) | 50-60 | |||||||||||||
Degree of protection | IP68 | |||||||||||||
Number of pumps | 1 | |||||||||||||
Immersion depth (m) | 5 | |||||||||||||
Power input P1 (W) | 450 | |||||||||||||
Power output P2 (W) | 250 | |||||||||||||
Speed (1/min) | 2800 | |||||||||||||
Current type | Single-phase | |||||||||||||
Power input P1 max. (kW) | 0.45 | |||||||||||||
Power output P2 max. (kW) | 0,203 | |||||||||||||
Voltage (V) | 230 | |||||||||||||
Connection cable length (m) | 10 | |||||||||||||
Max. recommended height (m) | 7.5 | |||||||||||||
Pressure line diameter thread (inch) | 1¼ | |||||||||||||
Free passage (mm) | 10 | |||||||||||||
Max. temperature (°C) | 35 | |||||||||||||
Max. temperature of pumped liquid (short-term, max. 5 min.) | 70 °C | |||||||||||||
Circuit type | Float valve | |||||||||||||
Wheel type | Multi-channel wheel |
More Submersible pumps at our booth

E-ZW flood kit
Swift aid in an emergency: Pump combination for general-purpose use with E-ZW 65 A stainless steel submersible pump

Rainkit Sanisub 800
Dual pump solution for installation in collection shafts or pump sumps

Discover even more
You can find more information and additional products from Sanibroy on our website.
View Sanibroy Products
More Submersible pumps at our booth