Skip to main content
Exhibits > High-performance lifting stations > Sanicubic 2 Pro Smart Brushless
High-performance lifting stations
Sanicubic 2 Pro Smart Brushless
Dual-motor high-performance lifting station for large quantities of grey water and blackwater. Featuring the SMART control terminal

The Sanicubic 2 Pro Smart Brushless features 2 high-performance pumps and is suitable for the disposal of waste water from single-family homes and apartment buildings, kitchens, utility rooms and shops. It’s equipped with Pro X K2 technology for macerating solids in waste water and discharging it through a pipe with an external diameter of 50 mm. The two pumps work alternately, which significantly increases the duration of use and reliability. The 5 inlets, 2 of which are at a low level, allow great flexibility when installing sanitary facilities. The SMART control terminal and cable-connected alarm system complete the supplied package. The new Sanicubic 2 Pro Brushless model is equipped with our next-generation brushless motors. This not only lowers maintenance costs and energy consumption, but also increases its service life.

High-performance lifting stations
Sanicubic 2 Pro Smart Brushless
Dual-motor high-performance lifting station for large quantities of grey water and blackwater. Featuring the SMART control terminal

The Sanicubic 2 Pro Smart Brushless features 2 high-performance pumps and is suitable for the disposal of waste water from single-family homes and apartment buildings, kitchens, utility rooms and shops. It’s equipped with Pro X K2 technology for macerating solids in waste water and discharging it through a pipe with an external diameter of 50 mm. The two pumps work alternately, which significantly increases the duration of use and reliability. The 5 inlets, 2 of which are at a low level, allow great flexibility when installing sanitary facilities. The SMART control terminal and cable-connected alarm system complete the supplied package. The new Sanicubic 2 Pro Brushless model is equipped with our next-generation brushless motors. This not only lowers maintenance costs and energy consumption, but also increases its service life.

Special features
  • Powerful and wear-resistant Pro X K2
  • Wide and flexible range of applications thanks to 5 inlets 
  • Two independent pumps ensure safe continuous operation
  • Easy to maintain thanks to easy access to the motor and level sensors
  • Designed for media temperatures of up to 70 °C in short-term operation
  • Simple, floor-mounted installation without major preparatory work
  • Fully submersible thanks to IP68 certification
  • SMART control terminal for enhanced user-friendliness
  • Lower maintenance costs and energy consumption with a longer service life thanks to brushless motors (Sanicubic 2 Pro BL)
Technical data
Sanicubic 2 Pro Smart Brushless
Discharge head max. (m) 13
Flow rate max. (m³/h) 15
Waste water type Grey water
Blackwater
Drive shaft Stainless steel
Motor housing PA 12 GF
Pump housing PA 12 GF
Tank PP
Seal NBR
Pump wheel PP GF
Motor insulation class F
Electrical class I
Frequency (Hz) 50-60
Degree of protection IP68
Control cable length (m) 4
Operating mode S3 50%
Number of pumps 2
Power input P1 (W) 1500
Power output P2 (W) 1050
Speed (1/min) 2800
Control type Smart
Current type Single-phase
Power input P1 max. (kW) 1.94
Power output P2 max. (kW) 1.36
Voltage (V) 220-240
Connection cable length (m) 2.5
Mains cable H07 RN-F 3G
Number of inlets 5
Inlet diameter (outer) 40
50
100
110
Pressure line diameter (outer) (mm) 50
Discharge diameter (inner) (mm) 50
Outer ventilation diameter (mm) 50
Max. temperature (°C) 35
Fill level alarm (mm) 210
Switch-on level (mm) 140
Switch-off level (mm) 70
Max. temperature of pumped liquid (short-term, max. 5 min.) 70 °C
Circuit type Pneumatic
Wheel type Pro X K2 macerator
Total volume (l) 45
Effective volume (l) 17.5