Skip to main content
High-performance lifting stations
Sanicubic 2 SC
Floor-standing, dual-motor high-performance lifting station with free-flow impeller for grey water and blackwater

The Sanicubic 2 SC is a floor-standing lifting station with 2 single-channel impeller pumps for grey water and blackwater. The Sanicubic 2 SC is available in 4 versions. It is equipped with a DN 150 inlet to collect large volumes of waste water from public buildings, shops, businesses or apartment buildings. The free passage of 80 or 100 mm allows the drainage of up to 165 m³ of waste water per hour. The 2 SC3.0/4.0/5.5 T models come as standard with the pneumatic ZPS 2 control terminal with audible and visual alarm. The sanicube 2 SC 7.5 T is used with the PS 2 control system with LCD screen. It is connected to the sanitary facilities by means of a DN 150 waste water collection pipe. All Sanicubic 2 SCs are suitable for continuous pressure drainage.

High-performance lifting stations
Sanicubic 2 SC
Floor-standing, dual-motor high-performance lifting station with free-flow impeller for grey water and blackwater

The Sanicubic 2 SC is a floor-standing lifting station with 2 single-channel impeller pumps for grey water and blackwater. The Sanicubic 2 SC is available in 4 versions. It is equipped with a DN 150 inlet to collect large volumes of waste water from public buildings, shops, businesses or apartment buildings. The free passage of 80 or 100 mm allows the drainage of up to 165 m³ of waste water per hour. The 2 SC3.0/4.0/5.5 T models come as standard with the pneumatic ZPS 2 control terminal with audible and visual alarm. The sanicube 2 SC 7.5 T is used with the PS 2 control system with LCD screen. It is connected to the sanitary facilities by means of a DN 150 waste water collection pipe. All Sanicubic 2 SCs are suitable for continuous pressure drainage.

Special features
  • High pumping capacity with non-clogging operation using single-channel impeller pumps with 80 or 100 mm free passage
  • Easy to maintain thanks to easy access to the motor
  • Two independent pumps for safe continuous operation
  • Simple, floor-mounted installation 
  • Ready for installation – external control unit with alarm system included in scope of supply
  • Large effective volume reduces the number of switching operations, putting less strain on the motor and control system
  • Quick and easy to install thanks to direct connection to the DN 150 waste water collecting pipe
  • Star delta starter for the Sanicubic 2 SC7.5T model reduces the start-up current
  • 4 versions in different performance classes for the perfect application solution
Technical data
Sanicubic 2 SC
Discharge head max. (m) 22
Flow rate max. (m³/h) 165
Waste water type Grey water
Blackwater
Drive shaft Stainless steel
Motor housing EN-GJL-200
Pump housing EN-GJL-200
Tank PE HD
Seal Carbon/ceramic
Pump wheel EN-GJL-200
Motor insulation class F
Electrical class I
Frequency (Hz) 50-60
Degree of protection IP56
Control cable length (m) 3.5
Operating mode S3 25%
Number of pumps 2
Power input P1 (W) 6300
Power output P2 (W) 5500
Speed (1/min) 1400
Control type ZPS 2
Current type Three-phase
Power input P1 max. (kW) 6.3
Power output P2 max. (kW) 5.5
Voltage (V) 400
Number of inlets 1
DN inlet diameter 150
Pressure line diameter DN 100
Ventilation diameter DN 100
Free passage (mm) 100
Max. temperature (°C) 35
Max. temperature of pumped liquid (short-term, max. 5 min.) 55 °C
Circuit type Pneumatic
Wheel type Single-channel wheel
Total volume (l) 1000
Effective volume (l) 500
More High-performance lifting stations at our booth
More High-performance lifting stations at our booth